VELOX PH-750 VDC, PARALLEL RESISTIVE HEATING CABLE (DOUBLE INSULATED)
- Conductor, tinned Cu, 1.5mm²
- Conductor insulation, Fluorplastic
- Bed for resistance wire
- Resistance wire Ni-Cr
- Sheath 1 Fluorplastic
- Sheath 2 Fluorplastic
Range of application
Switch heating at railways, subways and tramways.
PH-750 VDC have a double sheath of corrosion hardened material (Teflon) and manages aggressive environmentals.
PH-750 VDC is double insulated and without earth screen.
|Basic type||VDE 253 / IEC800|
|Approved, tested by||CE|
|Color||Green outer jacket|
|Test voltage||3000 V DC|
|Rated voltage||750 VDC|
|Distance between contact points||2 meter|
|Max. Operating temperature||180°C|
|Max. exposure temperature||max. +230°C|
|Installation temperature||min -30°C|
|Bending radius||min 50mm|
|Dimension||7.8 x 5.6 mm|
Note: Velox PH-750 VDC is installed on 750V with a channel of glass fibre plastic.
|Part.no||Type of cable||Output
|VX504||Velox PH-750 VDC||70||160|
* at 10% powerloss
If two cables are installed parallel under same channel, standard channel, you will have a constant wattage parallel resistance cable with output up to 180W/m.
2 cables installed parallel under channel (ref.no: 6-18-9).