VELOX PROTECTIVE CHANNEL IN STAINLESS STEEL
Area of use
The channel shall be placed above heating element as mechanical protection.
The poor heat transfer through the channel enlarges heat transfer to rail.
The channel is available in two shapes, one standard and the other one flexible, with “jagged edge” which makes it possible to turn the channel against the neck of the rail and also simplify forming over unevenesses.
Technical data
| Dimension: | See sketch | ||
| Material | Stainless steel, acid proof 2348 or 302 | ||
| Part.no | |||
| Artnr: | VX6-16-1 Protective Channel 1,0m standard 16mm | ||
| VX6-8-1 | Protective Channel 1,0m Standard 8 mm | ||
| VX6-12-1 | Protective Channel 1,0m Standard 12 mm | ||
| VX6-12_F | Protective Channel 1,0m Flexible 12 mm | ||
| VX6-16-1 | Protective Channel 1,0m Standard 16 mm | ||
| VX6-16-F | Protective Channel 1,0m Flexible 16 mm | ||
| VX6-18-9 | Protective Channel 1,0m glass fabric | ||
| VX6-6-2-2 | Protective Channel 1,0m double | ||
Construction
Example of flexible channel fitted over obstruction in rail section.
Example of standard channel
Cable installed under protective channel in jaw block
Cable installed under switch rod
Cable installed under jaw blocks on stock rail
Cable installed where there are no place under switch rod
Cable installed where there are no place under switch rod
