Velox Mounting clips
Clips is used to keep the heating element or the heating cables with protective channel on place on the rail foot.
The clips are available in several sizes and widths for special lead-ins.
Technical data
| Sizes: | According to drawing |
| Material: | Stainless steel 304, EN10088, or CS70 |
| Part.no | See drawing |
Typical profile thickness
| MOVING RAIL |
| Moving rail 11-13 mm Moving rail 16-18 mm Moving rail 20-22 mm Moving rail 25 mm, cut-out (C-Clip 25) Moving rail head 20-22mm Moving rail head 16-18mm Moving rail head 13mm |
| STOCK-RAIL |
| Stock rail 13-mm Bullhead clips 13mm DC-clip Stock rail 34 mm/DC (C-Clip 34) Toe end clips |
| SPECIAL CLIPS |
| S-Clip 10 mm S-Clip 10-16 mm S-Clip 16 – 20 mm House clip SS Extension plate Straps |
Note:
Do not put metal elements on channels where insulation part are fitted. Heating elements should be installed without channel at this point.
Construction
Cutout clips fitted
3 different sizes of clips fitted due to different thickness on rail section.
Cable under slotted jaw bolts.
